NEC DYE Microtemp AUPO Emerson Cross Thermal Cutoff Fuse 10KA 250V
150C Auto Reset
Description Of The NEC DYE Microtemp AUPO Emerson Cross Thermal
Cutoff Fuse
* Alloy Thermal-link/ Thermal Cutoff (TCO) is defined as a
non-resettable protective device functioning one time only. It is
widely used in electrical equipment. Alloy TCO is mainly consist of
fusible alloy, flux, plastic or ceramic case, sealant epoxy and
lead wires. Normally, fusible alloy is jointed to the two lead
wires. Under abnormal condions, when the temp. reaches to the
fusing temp. of alloy TCO, the fusible alloy melts and quickly
retracts to the two lead wire ends with the aid of the flux and
dis connects the circuit completely.
* AMPFORT's alloy TCO is classified into Axial and Radial shapes,
with Rated Current 1 A to 200 A, Rated Functioning Temp. 76°C to
230°C, with CCC, UL, CUL, VDE, TUV, KTL, PSE, Approvals and RoHS,
REACH compli ant.Alloy Thermal-link/ Thermal Cutoff (TCO) is
defined as a non-resettable protective device functioning one time
only. It is widely used in electrical equipment. Alloy TCO is
mainly consist of fusible alloy, flux, plastic or ceramic case,
sealant epoxy and lead wires. Normally, fusible alloy is jointed to
the two lead wires. Under abnormal condion s, when the temp.
reaches to the fusing temp. of alloy TCO, the fusible alloy melts
and quickly retracts to the two lead wire ends with the aid of the
flux and dis connects the circuit completely.
* AMPFORT's alloy TCO is classified into Axial and Radial shapes,
with Rated Current 1 A to 200 A, Rated Functioning Temp. 76°C to
230°C, with CCC, UL, CUL, VDE, TUV, KTL, PSE, Approvals and RoHS,
REACH compli ant.
Before Operation Of The NEC DYE Microtemp AUPO Emerson Cross Thermal Cutoff Fuse
The Y type contains a sliding contact, springs, and a thermal
pellet inside a metal case. When spring B is compressed, firm
contact between lead A and the sliding contact occurs. At normal
temperatures, current flows from lead A to the sliding contact and
then through the metal case to lead B.
After Operation Of The NEC DYE Microtemp AUPO Emerson Cross Thermal Cutoff Fuse
When the ambient temperature rises to the SEFUSE operating
temperature, the heat transferred through the metal case melts the
thermal pellet. When the thermal pellet melts, springs A and B
expand, moving the sliding contact away from lead A. The electrical
circuit is opened by breaking contact between the sliding contact
and lead A.
Application Scope Of The NEC DYE Microtemp AUPO Emerson Cross Thermal Cutoff Fuse
1. Home Appliances (e.g. irons, coffee makers, rice cookers, bread
makers, toasters, refrigerators)]
2. Comfort Conditioning Appliances (e.g. air conditioners, fans,
humidifiers, heaters)
3. Personal Care Appliances (e.g. hair dryers, hair curlers, hair
setters)
4. Business Appliances (copiers, laser printers, facsimiles, power
strips)
5. Electrical Components (e.g. transformers, solenoids, AC
adopters)
6. Automotive Electronics (e.g. electromagnetic clutches,
resistors)
Specifications Of The NEC DYE Microtemp AUPO Emerson Cross Thermal Cutoff Fuse
| P/N | Rated operating temperature Tf(℃) | Actual operating temperature (℃) | Hold temperature Tc(℃) | Limit temperature Tm(℃) | Rated Voltage (V) | Rated Current (A) | Max impulse current (A) |
| Y10 | 102 | 98±1 | 72 | 150 | | 10 | 13000 |
| Y20 | 115 | 111±1 | 87 | 150 | | 10 | 13000 |
| Y30 | 125 | 121±2 | 95 | 150 | | 10 | 13000 |
| Y35 | 130 | 126±2 | 102 | 150 | | 10 | 13000 |
| Y50 | 150 | 146±2 | 120 | 180 | | 10 | 13000 |
Size Of The NEC DYE Microtemp AUPO Emerson Cross Thermal Cutoff Fuse (mm)
| A | B | C | D | E※ |
| 8.5±0.5 | 6.8±0.2 | 3.5±0.2 | 0.8±0.05 | 45±2 |
Length can be customized on request |
